Desiccant dehumidifiers
Desiccant Technologies Group UAB – is a European based manufacturer of desiccant based dehumidification systems and bespoke Air Handling Units. The equipment we manufacture is primarily utilized for precise humidity control as well as complete microclimate (temperature, humidity, and indoor air quality) control. At the heart of each dehumidifier is a high moisture adsorbing capacity, long life silica gel rotor.
Designed to be the most advanced, reliable, quietest, and user-friendly dehumidifiers available on the market today. Ultra-quiet, low maintenance dehumidifier, that provides the end user a host of information previously not seen on small/medium industrial desiccant dehumidifiers.
The DL series units are available with a range of pre and post treatment modules to meet the specific requirements of your application.
Constructional Features:
-
The casing has high resistance to atmospheric corrosion and made of 1,0 mm stainless steel sheet metal; some parts made of 1,5 and 2,0 mm stainless steel in order to achieve rigidity; the panels with 20mm rockwool insulation
-
Compact design and low weight of the unit
-
Available in a range of casing materials (430SS, 304SS, 316L)
-
Single piece, compact design, allowing to rapid installation
-
Pre Post treatment modules available
-
Low maintenance design and long life seals
-
High quality components made exclusively by European manufacturers
-
User friendly touch screen HMI as standard
The MDC desiccant dehumidifier is designed to efficiently dehumidify air in open system applications. The unit could operate in recirculation mode too. In this case plate with spigots for ductwork connection has to be ordered as additional accessory. The compact construction allows extended periods of operation with a minimum of maintenance. The design facilitates easy transport by one person. Dehumidifier is designed for drying-out buildings, new buildings as well as waterdamaged buildings. Furthermore, it is used for room air dehumidification, dry air storage, water works and pump stations, etc. Especially suitable for low temperature and low humidity operation.
Constructional Features:
-
The casing has high resistance to atmospheric corrosion and made of 1,0 mm stainless steel sheet metal; some parts made of 1,5 and 2,0 mmstainless steel in order to achieve rigidity
-
Compact design and low weight of the unit
-
High performance at low temperatures and low relative humidity in a room
-
Optional humidistat is available as an accessory
-
Easy access to the internal components of the dehumidifier for the maintenance
-
PTC-heater
-
High efficiency of the washable silica gel rotor
-
The design facilitates easy transport by one person
-
All components made exclusively by European manufacturers
Desiccant Technologies Group industrial desiccant dehumidifier MDC5000 designed for general purposes – room air dehumidification and process drying. The compact construction allows extended periods of operation with a minimum of maintenance. Especially suitable for low temperature and low humidity operation. Unit includes desiccant rotor, EC-fans, reactivation heater, bag filters and controls. Panels insulated with 20mm rock wool insulation.
Constructional Features:
-
The casing is completely hermetic and panels are made of 1,0mm AluZinc sheet metal with isolation of 20mm (rock wool); it has high resistance to atmospheric corrosion. Powder painted panels (outside only); rigid frame made of 1,5mm AluZinc sheet metal (powder painted completely) to achieve rigidity
-
Compact design and low weight of the unit
-
High performance at low temperatures and low relative humidity in a room
-
Optional humidistat is available as an accessory
-
Microprocessor based control (optional)
-
Tubular electric heating elements for regeneration (standard unit) as well as on request with water, steam or gas heating coil (customized unit)
-
Easy access to the internal components of the dehumidifier for the maintenance
-
EC-fans
-
Pocket filters G4-F9
-
High efficiency of the washable silica gel rotor
-
All components made exclusively by European manufacturers
Lithium battery dry room dual rotor dehumidifiers LDP-2DW
Lithium battery dry room dual rotor dehumidifiers LDP-2DW.
Ultra-low dewpoint industrial desiccant dehumidification systems
Overview.
-Unit airflow range available from 2,000 to 50,000 m3h
-Available Supply Dew point down to minus 80°C
-Ultra low leakage and compact design
-Optimised for low energy usage with up to 50% energy reduction available over single rotor systems.
The DT Group LDP-2DW DAHU’s are bespoke Dual Rotor desiccant dehumidification systems designed for precise ultra-low dewpoint control.
The LDP-2DW series are tailor made to meet the demanding needs of industries requiring precise ultra-low dewpoint control. The series represents the most compact and energy efficient ultra-low dewpoint dehumidifiers available on the market today. Ideal for use in Battery Dry Rooms with supply dewpoints down to minus 80.0°C achievable.
The LDP-2DW series units can be configured to meet the specific requirements of your application.
Dry room dehumidifiers LDP-1DW
Dry room dehumidifiers LDP-1DW
Overview.
-Unit airflow range available from 1,000 m3h
-Ideally suited for fresh air make up systems requiring Supply Dew point down to minus -50°C from ambient
-Ultra low leakage and compact design
The LDP-1DW Single Rotor series are tailor made to meet the demanding needs of industries requiring precise ultra-low dewpoint control. Ideal for use in applications requiring supply of low dewpoint air such as battery research labs and fluid bed dryers
The LDP-1DW series units can be configured to meet the specific requirements of your application.